If you are have a Fresco Logic FL1009 or FL1100 base USB 3.0 controller card and are having problems with the controller not working in Windows 10 and you are using the Fresco Logic controller driver please try the following. Uninstall any versions ...
Installer Command Line options 1) Silent install Quiet mode (there is no user interaction), this will set the UI level to no UI. Usage: FLUSB3.0-3.8.1.0.exe { /quiet | /qn } msiexec.exe [/i][/x] <path_to_package> { /quiet | /qn } Example: ...
The answer to this question depends on which Fresco Logic xHCI controller you have, which operating system you are using and which driver you are using. Older Fresco Logic controllers FL1000 and FL1009 do not support UASP. For FL1100, FL1100EX, ...
This is usually caused by lack of power to the card. Many of the cards using our USB 3.0 host controllers have a power connector that needs to be connected to the system power supply. If a power cable is not connected then the controller may show up ...
This is usually caused by lack of power to the card. Many of the cards using our USB 3.0 host controllers have a power connector that needs to be connected to the system power supply. If a power cable is not connected then the controller may show up ...
This issue should now be fixed. If you are still having this problem, please try clearing your browser cache. If that doesn't work please open a ticket and tell us which specific link is having this issue and we will fix it. This is an issue when ...